Reverse Engineering RET Homepage RET Members Reverse Engineering Projects Reverse Engineering Papers Reversing Challenges Reverser Tools RET Re-Search Engine Reverse Engineering Forum Reverse Engineering Links

Go Back   Reverse Engineering Team Board > Reverse Engineering Board > Reverse Code Engineering
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-26-2008, 06:50 PM
y8y8y8y y8y8y8y is offline
Senior Member
Join Date: Sep 2007
Posts: 210
Default Sentinel vUSB Emulator How-To

Hi All,
I decided to write this little how-to after spending a lot of time trying to emulate my sentinel dongle. All the programs I used were not written by me and I am very grateful to all great guys here.
I emulated "Sentinel SuperPro"
1. Dump dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "UniDumpToReg" util to convert the SSP to REG. Inside "UniDumpToReg" select your SSP file and then select "SafeKey ssp -> vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:




"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your comp should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot
Here is link to all utils that I mentioned above:

New converter from ssp to reg ver 1.11:

Last edited by y8y8y8y : 06-02-2008 at 08:58 AM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.