![]() |
![]() |
![]() |
![]() |
![]() |
||||||||||
|
||||||||||||||
![]() |
#51
|
|||
|
|||
![]() @ pdbhi
Edious .exe has no effect on the X3D files When you install magic Key setup ..it extracts 2 modified plugins TscSTD61.TPI & TscSTD65.TPI in explode plugin folder,those control the loading of X3D files in edious xplode...And the TPI files are dongle protected to..Basically the TPI files are C++ Dlls..The Problem is the TPI files have modified headers or some antiolly trick and do not load into ollydbg ..infact they load but no sections loads...Maybe you can share those files here alone for someone to figure out the header issue ... |
#52
|
|||
|
|||
![]() @pdbhi: upload Canopus_Edius_5.12.part07
__________________
... Either you work well or you work much .... |
#53
|
|||
|
|||
![]() @flasher97
both of these files are also packed with R4nd envelope, unpacking these files will not solve the problem because all the effects are also ciphered... unpacked TscSTD61.TPI & TscSTD65.TPI can be downloaded from the following link: Xplode.tpi.zip (368KB) |
#54
|
|||
|
|||
![]() Those are not unpacked files...
you have just uploaded original explode TPI files |
#55
|
|||
|
|||
![]() that's what it means, unpacked/unprotected/untouched...
you miss-understood... |
#56
|
|||
|
|||
![]() Any Idea to decipher files for comparing ciphered/deciphered sample files and recover cipher algoritham?
thanks |
#57
|
|||
|
|||
![]() as a key clone rockey4nd
|