How to Activation a module in SSPro dongle？

[Ctchen]

I already emulate my "ultra pro" dongle with Vusbus and it work well
But due to the software have some functional limited,
I have tried to modified the dumped .reg for a few days,But can’t succes.
Can Anyone help me to Activate it.
Below is the attachment of Keyview from "ultra pro dongle" dumped:
(*****To run the soft you should be dongle and Protection Key number Both *****)

REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ru-board\mulators\Dump\xxxx0000]
"sntMemory"=hex:81,69,xx,xx,00,00,00,00,00,08,00,0 0,99,CF,00,00,00,00,00,00,00,00,00,00,51,68,20,00, DF,87,0A,C0,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CellType"=hex:01,01,03,03,03,03,03,03,01,00,00,00 ,01,01,03,03,\
01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,\
01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,\
01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01
"Type"=dword:00000000
"DongleType"=dword:00000003

Hope everyone can help me about this. THKs!!

[BfoX]

olly+ida+your head =)

[Ctchen]

Originally Posted by BfoX

olly+ida+your head =)

I have tried to use olydbg and finded checkpoint,
But the software being packed by Armdillo 3.78 Professional Ver.
and Can't run after Unpacking.
Can Anyone help me ?

[mhafez]

nobody can help you without the software or at least the developer ID

[Ctchen]

Dear mhafez:

The soft developer ID is "73B4",
Very Thanks

[bybyby]

maybe it need the serial key to the software

[Lomex]

Try this with MK 1.8.2.4

Posted some time ago here. Maybe it works

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\000073B4a]
"Type"=dword:00000000
"DongleType"=dword:00000003
"Name"="Dump 73B4"
"CellType"=hex:\
01,01,03,03,03,01,03,01,01,00,00,00,01,01,01,01,\
01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,\
01,01,01,01,01,01,03,03,01,01,01,01,01,01,01,01,\
01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01
"sntMemory"=hex:\
BF,51,B4,73,00,00,00,00,08,00,00,00,99,CF,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,D7,28,FF,01,D4,87,09,C0,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

[BfoX]

the midas Civil want ultra pro dongle

[Ctchen]

[Please DO NOT quote whole messages, it is unnecessary]

Dear Lomex:
Thank You for your Help.
I have try by Multikey 1.8.2.3(for XP),But it dosn't work
and the err. message is "Lock is not detected, Please
check the Lock....................."

[bybyby]

The fuction is desinged by the serial number, you can't change it with the emulated key file