SentinelSuperpro leased license

[trasolamo]

Hi,

i am new in this forum, but i am trying since a few weeks to solve emulate a a sentinel superpro dongle.

I have te original one with a few days of license left on it. I dumped it with edgepro, created a dng and emulated it with sentemul2007. everything worked out fine. the prog showed me the license time left on it.

I wonder if i could delete the lease option, or at least extend it for a few years. Is there a way to use edgepro and Sentemul2007? i tried it but didn't worked out.

As well i tried it with multikey 18.2.3 (SSUMD) creating dmp -> ssp -> reg files from it, but it didn´t even worked out to emulate the dongle properly (the prog didn't recognize the dongle)

I used TOROs Monitor v2.01 to see the comunication between the prog and the real USB dongle (lookslike this, but there is written superpro on it: Image

I saw that the prog read cell 63 from the dongle, but everytime it had another value (log-file below).

I have the impression that multikey isn't able to emulate this changing cell 63 while SENTEMUL is doing well. I am not able to monitor the SENTEMUL communication.

A few questions:

how can i emulate the dongle with multikey?

how can i delete the lease option?

Thanks in advance

toro log file

[gnerogeem]

Since you're new here, I suggest you start with searching about this dongle.
There are many topic has been discussed about this dongle.
Just use the search button, or if you don't know where it's located, here it is.

[trasolamo]

thanks for the hint, but like I said, I first looked up the forum and didn't found anything similar on leased license, so thats why I decided to ask you guys.
I tried to describe the problem in details, so that you can get an impression of the problem.

[P@blo]

As I understood You key not less UltraPro.
Can You show Elite_r dump of key?

[trasolamo]

the reg file produced by ELITE is attached (the last two values [sntMemory cell 63]are changing everytime the prog access the dongle) maybe it is the lease option?

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\0000xxxx]
"Name"="SSPRO"
"CopyLeft"="(c)Elite"
"DongleType"=dword:00000003

"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,01,00,00,00,00,\
00,00,00,00,00,00,00,00

"sntMemory"=hex:\
xx,xx,xx,xx,00,00,00,00,00,00,00,00,00,00,11,00,\
24,5D,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,49,74,6D,6E,73,2C,69,61,70,6F,\
34,32,08,38,33,30,00,00,61,38,76,30,68,66,FB,7A,\
F6,76,8F,92,72,6A,36,33,ED,73,FD,3F,AB,7A,3F,3A

[gnerogeem]

Lease here means trial or something else?

[P@blo]

Is that dump of sentemul?
The cell 0x33 is 0000 and type of cell - 1(Read-Only);
Your log not consist any fn with cell 0x33.
May be You need debug program and stop after last readAddress and look value of 0x3B (dec 59).
Why You write about cell 0x3F (63)?

[trasolamo]

@ gnerogeem

yes lease means that there are a couple of days left on that license. there is no limit on the dongle except the days left.

@ p@blo

value of cell 59: the toro log says:

Out:> Read Address=59 (0x3B) -> Status=0x0
Data=13110 (0x3336)

cell 63: I wondered why that cell is changing its value everytime the prog accessed the dongle here's an extract of log file regarding cell 63:

Out:> SetUnitInfo

Out:> Read Address=57 (0x39) -> Status=0x0
Data=37519 (0x928F)

Out:> Read Address=56 (0x38) -> Status=0x0
Data=30454 (0x76F6)

Out:> Read Address=55 (0x37) -> Status=0x0
Data=31483 (0x7AFB)

Out:> Read Address=54 (0x36) -> Status=0x0
Data=26216 (0x6668)

Out:> Read Address=61 (0x3D) -> Status=0x0
Data=16381 (0x3FFD)

Out:> Read Address=60 (0x3C) -> Status=0x0
Data=29677 (0x73ED)

Out:> Read Address=63 (0x3F) -> Status=0x0
Data=54759 (0xD5E7)

Out:> Read Address=62 (0x3E) -> Status=0x0
Data=31403 (0x7AAB)

Out:> Read Address=63 (0x3F) -> Status=0x0
Data=54759 (0xD5E7)

Out:> Read Address=62 (0x3E) -> Status=0x0
Data=31403 (0x7AAB)

all the cells keep their values but cell 63 changes to:

Out:> Read Address=63 (0x3F) -> Status=0x0
Data=11316 (0x2C34)

and then

Out:> Read Address=63 (0x3F) -> Status=0x0
Data=11285 (0x2C15)

and so on.
I dont know if this is normal. but i think, because of the lease option, the dongle must have stored some date information on it.

there is no log data entry for (0x33).

[gnerogeem]

How about using edgeprofix keygen?

[hexman]

hello all any one has the solution for Sentinel Super pro black key.

dumpers??
regards
hexman